LED Breathing Module

  • Cool "breathing" effect for accent lighting.
  • Dims and brightens the lights at a 5 second cycle simulating a breathing rhythm while at rest.
  • Controls up to 2 amps (that is a lot of LEDs!)
  • Cycling automatically shuts off after 8 hours.
  • Works with both LED and incandescent lights
  • Simple three wire installation.
  • One year warranty.

Would you like to add a cool effect to your vehicle's accent lighting?  This is the module you MUST have.  Provides a pulsing, "Breathing", effect similar to some laptops.  

It seems that LED accent lighting is all the rage right now; extra lighting in the passenger compartment, some lighing under the hood, a few lights showing off the suspension or accenting the underside, etc.  Just turning on the lights is cool and draws attention to some of the details, but gets a little tired.  We need to add some "life" to it.  

The idea behind this product is for the evening gathering or cruise-in.  You pull up and park, and flip the switch.  Instead of just flipping on, the lights start pulsing, slowly, rhythmically.  Increase intensity, decrease intensity, pause, increase, decrease, pause, as if the lights were tied to the breathing cycle of the car.  It is alive!

Connect the module's output to supply the ground connection for your accent lighting.  Supplying power (usually through a switch under the dash or someplace else out of sight) starts the cycling.  If you don't cut power to the unit, the cycling will continue for up to 8 hours.  After 8 hours, the unit enters a low-power "sleep" state so you don't completely drain the battery.

$47.99 PN 13021   (Buy Now on our ebay store)

13021 Installation.PDF


13021



Tech Specs:

2”x1.5”x1” plastic enclosure with mounting tabs.

Internal resettable fuse. 

Fully potted

2 foot, 18 gauge leads for power, ground, and output.

Microprocessor controlled pulse width modulation

Simple installation

Made in the USA

© Revolution Electronics 2017     sales@RevolutionElectronics.com